Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
1～21 item / All 21 items
It exhibits excellent mechanical strength and adhesion, demonstrating high anchor performance!
Introducing epoxy resin-based adhesives for civil engineering and construction (for anchor installation). [Applications] ● Filling material for anchoring concrete structures ● Adhesion and fixation of sashes, handrails, and fixed chairs ● Adhesion and fixation of various anchors
[Confident in Price] Four types available! Special adhesive for joining and raising existing concrete.
The "Showbond #202 Series" is a two-component, solvent-free epoxy resin adhesive that exhibits strong adhesion and waterproof properties. There are four types available, tailored to different types of concrete and pouring effective times. It has a wide range of applications, including jointing and raising of foundation concrete, raising of road shoulders due to pavement improvements, widening of bridge abutments, embankments, flood control levees, spillways, and jointing and raising of dam aprons. 【Features】 ■ #202JT - For jointing and raising new and old concrete for ultra-rapid hardening concrete - Suitable for wet surfaces - Effective pouring time: within 60 minutes at 20°C (not usable if temperature exceeds 25°C) ■ #202 - Used for pouring Portland cement concrete and mortar - Effective pouring time: within 3 hours at 20°C *For more details, please refer to the PDF document or feel free to contact us.
【Confident in Price】Injection is possible even into the details of wet cracks! Introducing epoxy resin-based adhesive for wet surfaces.
"WB Grout" hardens by replacing water underwater and strongly adheres to concrete, mortar, and steel materials. Due to its low viscosity, it can be injected into the details of damp cracks. It has excellent durability and water resistance, making it suitable for use as an injection adhesive in post-installed anchors where moisture or water accumulation in the drilled hole cannot be avoided, as well as for injecting materials in concrete cracks that are damp or have water accumulation inside. 【Features】 ■ Hardens by replacing water underwater ■ Strongly adheres to concrete, mortar, and steel materials ■ Excellent durability and water resistance ■ Composed of a main agent and a hardener that are mixed together at the time of use *For more details, please refer to the PDF document or feel free to contact us.
![[Processing Example] 3M Scotch Grip SG-2451J](https://image.mono.ipros.com/public/product/image/1ea/2000488777/IPROS19235888318273028160.png?w=280&h=280)
Introducing a case where Scotch Grip SG-2451J was pre-coated on screw and bolt parts.
We would like to introduce a processing example from Sansei Industrial Co., Ltd. We pre-coated screws and bolt parts used in automotive-related products with 3M's Scotch Grip SG-2451J. Scotch Grip SG-2451J is a solvent-based adhesive and sealant that uses orange epoxy capsules made of epoxy resin. It is characterized by its high adhesion strength and resistance to vibration and impact. Additionally, it has a wide temperature range, allowing for use in high-temperature environments compared to Scotch Grip G-2353. 【Features】 ■ High adhesion strength and resistance to vibration and impact ■ Wide temperature range, suitable for high-temperature environments ■ Specification of coating area is possible ■ Uniform application without inconsistencies in work *For more details, please refer to the PDF document or feel free to contact us.
![Information on adhesive-related products [Electrical and Electronics Field]](https://image.mono.ipros.com/public/product/image/fda/2000796887/IPROS89836317903891844015.jpeg?w=280&h=280)
They are widely used in various devices and components such as AV, OA, home appliances, and heavy electrical equipment.
■Adhesives AV (Audio-Visual) equipment, OA (Office Automation) equipment, home appliances, heavy electrical equipment, air conditioning, communication devices, electronic components... These products, which support modern life and the information age and are expected to become more widely used in the future, cannot function without adhesives. For example, in speakers and laser discs, even a slight decrease in adhesive capability can adversely affect sound and image quality, so various types of adhesives with greater stability are selected. Additionally, for very delicate OA and communication devices and electronic components, precise adhesion of 1/100 to 1/1000 is required, along with adhesives that are resistant to electrical corrosion and have good insulation properties. Furthermore, adhesives that demonstrate excellent heat resistance and durability under high-temperature conditions (over 100°C for tens of thousands of hours) due to increased density in laminating are necessary. ■Sealants Typical examples of sealant applications in electrical products include home appliances (refrigerators, washing machines, automatic dishwashers, etc.) and electronic components (LCDs, IC encapsulation, various lead wires), widely used in various electrical products. These utilize sealants with excellent electrical properties (insulation and conductivity), water resistance, and durability.
Epoxy resin adhesive that does not require a primer for concrete pavement.
"Uniload" is a two-component mixed epoxy resin used in road anti-slip paving methods to adhere hard colored aggregates to asphalt and concrete pavement surfaces. It is suitable for both operation with an epoxy vehicle (mixing the main agent and hardener after heating each to 60°C, then applying by spray) and for roller or brush application. 【Features】 ■ Fast curing reduces road closure time ■ Good elongation even in winter, preventing binder cracking ■ No aggregate loss due to resin softening in high summer temperatures *For more details, please download the PDF or feel free to contact us.
Epoxy resin adhesive that does not run when applied to the back of road studs.
"Road Epo" is a highly fluid epoxy resin adhesive suitable for road safety facilities, designed to be loose and easy to pour. It has excellent adhesion and can be used on materials such as polycarbonate, acrylic resin, and metal. Outstanding strength! A quick-drying type that cures in 30 minutes is also available. Please feel free to consult us. [Applications] ■Guidance markers, vehicle entry prevention posts, central dividers ■Road studs, curb studs, fixed guidance markers *For more details, please download the PDF or feel free to contact us.
Just mix in a 1:1 ratio. A simple, powerful, and versatile type of epoxy resin adhesive.
It sticks to anything, so it's a must-have! Perfect for when you're in trouble! ■ Can be directly applied to plywood, metal, glass, ceramics, stainless steel, etc. ■ Resistant to acids and hot water, can be used in bathrooms and pools. ■ Can be applied to slightly damp surfaces. ■ Tiles can be applied over already installed tiles, making it ideal for repairs. Can also be used in sauna rooms.
Alteco epoxy resin-based adhesive
● Strong adhesive power: Capable of bonding various materials. Particularly excellent for bonding metals, concrete, and porous materials. ● Excellent durability: Superior heat resistance, water resistance, weather resistance, and chemical resistance. ● Low curing shrinkage: Contains no volatile solvents, resulting in minimal shrinkage during curing. ● Electrical insulation: Does not conduct electricity. An excellent insulator. ● Environmentally friendly: Adhesive that does not contain formaldehyde. Registered with JAIA☆☆☆☆/4VOC.
Adhesion is possible with many materials! We offer suitable grades to meet various needs.
Our "epoxy resin-based adhesive" exhibits excellent performance, including strong adhesion, heat resistance, and chemical resistance. It can bond a wide variety of materials, particularly excelling in bonding metals, concrete, and porous materials. Additionally, it does not contain volatile solvents, resulting in minimal shrinkage during curing. We offer suitable grades to meet various needs, from electrical and electronic applications to equipment uses. 【Features】 ■ Strong adhesion ■ Excellent durability ■ Low curing shrinkage ■ Electrical insulation ■ Environmentally friendly *For more details, please refer to the PDF document or feel free to contact us.
【Confident in Price】Adhesive for wood, rigid plastics, etc.! Excellent chemical resistance, making it suitable for use as a waterproof and anti-corrosion protective material.
"Showbond #101" is a two-component epoxy resin adhesive with excellent properties such as strong adhesion, abrasion resistance, and chemical resistance. It is specially formulated in a paste-like consistency and concrete color to be suitable for bonding, filling, and troweling that require thickness. It has a wide range of applications in civil engineering and construction, including the installation of boundary blocks, adhesion of drainage blocks, joining of flue pipes, and adhesion of exterior wall tiles. 【Features】 - Excellent properties such as strong adhesion, abrasion resistance, and chemical resistance - Two-component type - Formulated in a paste-like consistency and concrete color - Wide range of applications including joining flue pipes and adhesion of exterior wall tiles *For more details, please refer to the PDF document or feel free to contact us.
【Confident in Price】No need for seals because it won't sag! Strongly anchors bolts even when wet.
The "Showbond Anchor Lock" is an epoxy resin-based adhesive designed for post-installed anchor fixation on wet surfaces. It eliminates the need for sealing work for downward and horizontal post-installed anchor fixation. It adheres strongly even when the borehole is wet. Additionally, this product comes in two types: Winter (W) for use in conditions between 5°C and below 20°C, and Summer (S) for use above 15°C. 【Usage Instructions】 ■ The main agent and hardener are separated and should be mixed together at the time of use. ■ The mixing ratio of the main agent to hardener is 7:3 by weight (for small amounts, be sure to measure with a scale). ■ Use an electric mixer to stir until there are no color variations, ensuring the main agent and hardener are completely mixed. ■ Since it begins to harden gradually after mixing, check the usable time and use it within that timeframe. ■ Remove any resin that has adhered to tools or equipment before it hardens. *For more details, please refer to the PDF document or feel free to contact us.
【Confident in Our Prices】Excellent durability and water resistance! Introducing the adhesives for civil engineering and construction that we handle.
The "WB Seal" strongly adheres to wet concrete, mortar, steel plates, and more. It is divided into a main agent and a hardener, which are mixed in a weight ratio of 2:1 at the time of use. It can be used as a sealing material for wet concrete surfaces or as a sealing material for reinforcing steel plate adhesion in leaking tunnel lining concrete. 【Features】 ■ Strong adhesion to wet concrete, mortar, steel plates, etc. ■ Excellent durability and water resistance ■ Divided into a main agent and a hardener, mixed in a weight ratio of 2:1 at the time of use ■ Appearance characteristics - Main agent: White paste-like - Hardener: Gray paste-like *For more details, please refer to the PDF document or feel free to contact us.
Further challenges in adhesives and encapsulants for semiconductors! A small drop supports the forefront of the world.
Ando DK Co., Ltd. is a company that manufactures and sells high-performance adhesives and sealants made from epoxy resin. Ando DK's products prioritize quality control, environmental impact, and reliability throughout all manufacturing processes, from raw material selection to product development, with consideration for the global environment. We aim to continue creating products that are friendly to both people and the environment for the future we want to leave for our children. 【Product Introduction】 ○ Applications: For semiconductor devices (LEDs, ICs, LSIs, MEMS, power devices, etc.) ○ Features: High thermal conductivity products, transparent epoxy products that are resistant to discoloration Applications for organic EL and silicon solar cells For more details, please contact us or download the catalog.
For patching old concrete and mortar! Excellent adhesion and workability epoxy resin adhesive.
"Refletaf Bond" is an epoxy resin adhesive for wet concrete surfaces that excels in adhesion to concrete and steel materials. It demonstrates excellent adhesion even on wet concrete surfaces and can be easily applied with brushes, rollers, etc., making it user-friendly. It can be used for jointing new and old concrete, raising levels, and for applying mortar to old concrete. 【Features】 ■ Excellent adhesion to concrete and steel materials ■ Demonstrates excellent adhesion even on wet concrete surfaces ■ Can be easily applied with brushes, rollers, etc., and is highly user-friendly *For more details, please refer to the PDF document or feel free to contact us.
It can be injected into fine cracks and voids in concrete structures with low viscosity, effectively contributing to the corrosion protection of internal rebar, waterproofing of structures, and prevention of deterioration!
Taflon G-250 is an epoxy resin-based adhesive designed for injection into cracks and voids in concrete structures. Utilizing the unique properties of epoxy resin, it provides a strong adhesive effect, enabling the restoration of structural strength. It is also highly effective in preventing corrosion of rebar within concrete, as well as waterproofing and preventing deterioration of structures.
By applying it to the surface of the concrete cracks, it penetrates internally through capillary action, bonding with the concrete to integrate and repair it.
Alpha Tech 380 is a penetrating epoxy adhesive developed for repairing cracks in concrete. By applying it to the surface of the crack, it penetrates internally through capillary action, bonding and integrating with the concrete. Compliant with JWWA K 143 (Method for Painting Epoxy Resin on the Interior Surface of Concrete Water Tanks for Water Supply) Compliant with JWWA Z 108 (Method for Leaching Tests of Water Supply Materials) 【Features】 - It can penetrate and bond by applying with a brush or roller from the surface of the crack. - It can penetrate and bond not only downward but also upward and sideways through capillary action. - It exhibits high strength and durability against compression, bending, and tension. - It demonstrates high adhesion performance not only on dry surfaces but also on wet concrete. - With low viscosity and a long usable time, it is ideal for injection, application, and filling work. - Being solvent-free, it does not contain volatile components.
It demonstrates adhesive strength sufficient to destroy concrete within 60 minutes at the applicable temperatures for each season. The cured material has low shrinkage and excellent mechanical strength.
- It exhibits a level of adhesion that can destroy concrete within 60 minutes at the recommended usage temperature for each seasonal type. - By utilizing the properties of epoxy resin, good wetting, low shrinkage after curing, and mechanical strength can be expected. - It is designed to be free of solvent components, allowing for use in thick layers and in confined spaces. - The main agent and hardener are each colored, making it less likely for mixing errors to occur. - It is designed to have a relatively low viscosity, making it suitable for pouring applications. - It has a fast curing design, which can improve work efficiency and reduce time. However, please be aware that the usable time is shorter as a result.
